Z1 CAM

Z1 CAM with filter bag for milling machines in dental production

Features and properties

Technical Datas
  • Width: 200mm
  • Height: 675mm
  • Depth: 590mm
  • Weight: 28KG
  • Suction: 700W
  • Throughput: 15-65l/s
  • Noise level: 41-60dB(A)
Options for the exhaust air connection

The standard equipment of the Z1 suction systems includes a diffusor at the output of the system, which guarantees the legally prescribed exhaust air flow of a maximum of one meter per second. Alternatively, an H14 filter or an activated carbon filter can be installed there in compliance with the prescribed guide value. As a further alternative, an adapter for the exhaust air connection to the outside is optionally available.

Regulated step switch

The Z1 has 5 suction levels, the performance of which the user can freely set and store in the first four levels. The unit has also an intelligent control of the suction power, which adjusts itself to the programmed setting depending on the filling level of the filter. This ensures a constant performance independent of the filling level of the filter bag. The fifth suction level serves as a boost for short-term maximum suction power.

Motor technology

The new Smart Drive control for carbon brush motors is installed in the suction systems Z1 ECO and Z1 CAM. This technology ensures a guaranteed motor operating time of 1500 hours without changing the carbon brushes. In addition, the long running time can be increased considerably by the possibility of changing the carbon brushes.

IFA certificate for dust-related testing by the DGUV

The suffix refers to suction systems in dental laboratories. It confirms that the dust extractor meets the requirements of the test specification DIN EN 60335-2-69, Appendix AA (degree of dust separation, filter change, dust extraction from the unit etc.) or that the dental suction system complies with the requirements described in the test specification GS-IFA-M020.

Zubler Extraction Technology APP

A Bluetooth connection with Zubler Extraction Technology APP gives you the possibility to obtain rapidly a high number of information about the condition of the suction system. You can easily make individual settings on the device from your smartphone or tablet and contact us via remote maintenance in case of service.

External control panel

For a higher comfort in handling the device we have developed an external control module, which you can additionally install at a freely selectable position of your work station. Always at your eye level, you control and operate the unit and obtain directly important information about the suction system.

  • SINGLE SUCTION

  • EXHAUST OUTDOORS

  • AIR RECIRCULATION IN THE LABORATORY

  • FILTER BAG

  • FILTER CARTRIDGE

  • CARBON BRUSH MOTOR

  • BRUSHLESS MOTOR

  • CAD/CAM COMPATIBLE


Z1 CAM PRO

Z1 CAM PRO with permanent filter system for milling machines in dental production

Features and properties

Technical Datas
  • Width: 200mm
  • Height: 675mm
  • Depth: 590mm
  • Weight: 31KG
  • Suction: 700W
  • Throughput: 15-65l/s
  • Noise level: 41-60dB(A)
Options for the exhaust air connection

The standard equipment of the Z1 suction systems includes a diffusor at the output of the system, which guarantees the legally prescribed exhaust air flow of a maximum of one meter per second. Alternatively, an H14 filter or an activated carbon filter can be installed there in compliance with the prescribed guide value. As a further alternative, an adapter for the exhaust air connection to the outside is optionally available.

Regulated step switch

The Z1 has 5 suction levels, the performance of which the user can freely set and store in the first four levels. The unit has also an intelligent control of the suction power, which adjusts itself to the programmed setting depending on the filling level of the filter. This ensures a constant performance independent of the filling level of the filter bag. The fifth suction level serves as a boost for short-term maximum suction power.

Motor technology

The new Smart Drive control for carbon brush motors is installed in the suction systems Z1 ECO and Z1 CAM. This technology ensures a guaranteed motor operating time of 1500 hours without changing the carbon brushes. In addition, the long running time can be increased considerably by the possibility of changing the carbon brushes.

IFA certificate for dust-related testing by the DGUV

The suffix refers to suction systems in dental laboratories. It confirms that the dust extractor meets the requirements of the test specification DIN EN 60335-2-69, Appendix AA (degree of dust separation, filter change, dust extraction from the unit etc.) or that the dental suction system complies with the requirements described in the test specification GS-IFA-M020.

Zubler Extraction Technology APP

A Bluetooth connection with Zubler Extraction Technology APP gives you the possibility to obtain rapidly a high number of information about the condition of the suction system. You can easily make individual settings on the device from your smartphone or tablet and contact us via remote maintenance in case of service.

External control panel

For a higher comfort in handling the device we have developed an external control module, which you can additionally install at a freely selectable position of your work station. Always at your eye level, you control and operate the unit and obtain directly important information about the suction system.

  • SINGLE SUCTION

  • EXHAUST OUTDOORS

  • AIR RECIRCULATION IN THE LABORATORY

  • FILTER BAG

  • FILTER CARTRIDGE
  • CARBON BRUSH MOTOR

  • BRUSHLESS MOTOR

  • CAD/CAM COMPATIBLE


FZ20

Central suction system for the connection of all workstations and dust-generating appliances in laboratories of any size. Thanks to an infinitely adjustable vacuum control independent of filter contamination and conduction of the exhaust air to the outdoor area, the system offers a high standard of air purity in the laboratory. The system is tailored perfectly to your laboratory through individual planning and consulting.

  • CENTRAL SUCTION

  • EXHAUST OUTDOORS

  • AIR RECIRCULATION IN THE LABORATORY

  • FILTER BAG

  • FILTER CARTRIDGE

  • CARBON BRUSH MOTOR

  • BRUSHLESS MOTOR

  • CAD/CAM COMPATIBLE

Zubler Gerätebau GmbH
Buchbrunnenweg 26,
D-89081 Ulm

Tel.: +49(0)731 - 14 52 0
Fax.: +49(0)731 - 14 52 13
Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Zubler Gerätebau GmbH

Cookies erleichtern die Bereitstellung unserer Dienste. Mit der Nutzung unserer Dienste erklären Sie sich damit einverstanden, dass wir Cookies verwenden. Mehr Infos...